S. J. EnterprisesFour-pillar hydraulic press manufacturer in Pune
Press for bush fitting, forming and assembly operations. Four hard-chromed pillars keep the ram square through the stroke.
S. J. Enterprises designs and builds the four-pillar hydraulic press at our works in Bhosari, Pimpri-Chinchwad, and supplies plants in Pune, Pimpri-Chinchwad, Bhosari, Chakan, Talegaon, Ranjangaon, Hinjewadi and across Maharashtra. Every unit is engineered around your component drawing and proven on your parts before dispatch.
What is inside a four-pillar hydraulic press
The 9 main assemblies of the four-pillar hydraulic press we build, as shown in the interactive 3D model on our home page.
- 1Hydraulic cylinderConverts oil pressure from the power pack into pressing force on the ram.
- 2CrownTop beam that carries the cylinder and takes the reaction load of every stroke.
- 3Guide pillarsFour hard-chromed pillars keep the ram square to the bed through the full stroke.
- 4Ram / slideThe moving platen, bronze-bushed on the pillars and driven by the cylinder rod.
- 5Upper diePunch tooling under the ram that forms, pierces or presses the part.
- 6Bolster & lower dieT-slotted bolster plate with the lower die that locates the workpiece.
- 7Base frameFabricated base that carries the bolster and anchors the press to the floor.
- 8Power packMotor, pump, oil tank, valves and pressure gauge that drive the cylinder.
- 9Control stationCycle start, stop and emergency-stop controls for the operator.
Why buy your four-pillar hydraulic press from S. J. Enterprises
- Established 2007 in Bhosari, Pune, with two production units and in-house design, VMC machining, fabrication, welding and assembly.
- Supplier to GE Aerospace, Tata, Aptiv, Amphenol, Autoline Industries, Polyrub, US Hydraulics and MK Tron.
- Trial on your parts, installation, commissioning and operator training included.
- After-sales service, spares and later retooling for new variants.
Send the drawing, material and output per shift. We reply with a concept and quotation.
Four-pillar hydraulic press: questions buyers ask
How long does a four-pillar hydraulic press take to build?
Typically 4 to 12 weeks from drawing approval depending on size and hydraulics; fixtures and gauges are usually faster. We commit the delivery date in the quotation.
Can the four-pillar hydraulic press be customised to our part?
Yes. Every SPM we build is designed around your component drawing, cycle time and floor space, and proven on your parts before dispatch.
Do you install the four-pillar hydraulic press at our plant?
Yes. We trial at our Bhosari works, then install, commission and train your operators at your plant, with service support afterwards.
Where are you located?
S. No. 213/5, Rastra Prem Nagar, Bhosari Dighi Road, Bhosari, Pimpri-Chinchwad, Pune 411039, with a machine shop at Talawade. We serve plants across Pune and Maharashtra.